WATER BASED ANTI SPATTER SPRAY
NON-FLAMMABLE, SOLVENT-FREE, SMOKELESS, VOC FREE
ANTI-CORROSION, ANTI-OXIDATION
SURFACE TREATMENT WITHOUT REQUIRING SUBSEQUENT DEGREASING
OF THE WELD, BRAZE WELD, ELECTRIC ARC WELDS,
ELECTRODE TIP WELD (MIG or MAG) WITH CO2, ARGON, ATAL AND MIXTURES
DESCRIPTION
Protects all parts and panels to be welded by preventing adhesion of spatter.
Usable for all wire diameters, even at high current.
Does not stain parts. Easily rinsed.
Does not oxidise metal parts.
Prevents corrosion.
No silicone, no metal content, no graphite, no solvents.
This anti-adhesion product may be used on all surfaces, for all braze welding, soldering, and electric arc welding, including automatic techniques, using consumable electrodes (MIG and MAG), under CO2, argon, ATAL or mixed gases.
It enables reworking without causing surface defects and does not generate hot tears.
FIELDS OF USE
|
Mechanical assembly Electrically welded equipment Electric motors Shipbuilding |
Railway rolling stock manufacturing Automobile manufacturing Manufacture of rolled and welded pipes Manufacture of machinery |
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES
|
Appearance |
Visual |
Liquid |
- |
|
Colour |
NF M 07.003 ASTM D 156 |
Colourless |
Rating |
|
Odour |
Olfactory sense |
Odourless |
- |
|
Density at 20°C |
ISO 12.155 |
999 |
g/L |
|
Surface tension at 20°C |
ISO 6297 |
29.8 |
Dynes/cm |
|
PROPERTIES OF ACTIVE INGREDIENTS |
|||
|
PROPERTIE |
STANDARD OR PRACTICE |
VALUE |
MEASUREMENT (UNIT) |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
1.2 |
mm2/sec |
|
Auto-ignition point |
ASTM E 659 |
Non-flammable |
°C |
|
Acid value |
ISO 6618 |
0.0 |
mg/(KOH)/L |
|
Sulphated ash content |
NFT 60 144 |
0.0 |
% |
|
Impurity content greater than 5µ |
FTMS 791 3005 |
0 |
nb/ml |
|
Environmental characteristic Bioaccumulation partition index Octanol/water |
OECD 107 |
less than 3 |
log kOW |
|
Water hazard class |
WGK |
Class 1 hazard-free water |
classification |
PRESENTATIONS
|
Drum 200 L
|
Container 20 L
|
|
Aerosol 650 ml
|
INSTRUCTIONS FOR USE :
Dilute using 1/3 water for 2/3 anti-adherent AS 10
Looking for another product ?
Discover our entire range by clicking on the photo
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 